Fighting mold in the bathroom is essential for the room’s cleanliness, safety, and health, regardless of whether you possess the home or are just renting out a space. Every bathroom will become moist at some point, but taking steps to dry it out will reduce the likelihood of mold developing there and may even stop it in its tracks if it has already begun.
Ways to Avoid Mold Development in Bathroom
It is not unusual to encounter mold in bathrooms because these spaces give optimal circumstances for mold development. Mold can readily grow in bathrooms if the proper precautions are not taken. This is because there is a constant source of wetness in bathrooms, from steam and water left in showers, bathtubs, and even the toilet.
The good news is you might take countless procedures to minimize the humidity in your bathroom and minimize the possibility of mold growth. While following these guidelines, you can avoid exposing yourself, your family, and your home to dangerous mold development and save hundreds of dollars.
Waterproof your bathroom.
Grout is the cement and sand combination to keep the spaces between your bathroom tiles in place. Tiles in a shower can be made waterproof to avoid water damage to the subfloor and wall surfaces. Cracked or chipped grout looks awful and can allow water to seep through, harming the subfloor or drywall below the tiles.
Homeowners can repair damaged grout if they are handy and do not mind getting their hands dirty. In any other case, you might always consider calling a specialist grout repair service.
Open the exhaust fan when showering.
Keep the fan on for at least half an hour after leaving the shower to eliminate all the wetness. More air can circulate through the confined quarters if you install a more durable ventilation fan. Keep the bathroom door or window open after each use to ensure sufficient ventilation. Mold can be prevented by keeping a room well-ventilated.
If you shower without an exhaust fan, you might see black spots on the ceiling. Spray the area with bleach and one part water to eliminate the mold. If mold development persists, hiring a property damage restoration firm specializing in mold remediation is best.
Eliminate excess water.
If you wish to stay clear of mold development after leaving the shower, eliminating as much water as possible is vital. Squeezing the sink or bathtub and giving it a fast wash down are the only things required to clean either one. A washcloth can reach the grout between the tiles and spaces where there is a possibility of mold development.
Once a week, give your bathroom an excellent scrub to guarantee no crud or dampness accumulation. To keep your bathroom mold-free, you can clean it with commercial chemicals and equipment like scrub brushes and washcloths. If you discover water damage in your bathroom, do not wait to contact a restoration firm to have it fixed. Moreover, you can visit a website for property restoration to learn more information about this matter.
Bottomline
It’s vital to maintain a mold- and mildew-free bathroom for the sake of a healthy and sanitary house. Taking some basic actions to get rid of mold growth can substantially impact the problem areas in your bathroom. Stay clear of the unpleasant task of eliminating mold by implementing the steps mentioned above.